Frequently Asked Questions
Common questions about the Stork VTOL, answered.
General
Every Stork is delivered fully assembled, flight-tested, and ready to fly. Each aircraft is individually produced — 3D-printed airframe, carbon fiber reinforcement, electronics integration, ArduPilot configuration, and a complete flight test program. You receive a verified aircraft with flight logs.
Approximately 4 weeks from deposit to delivery. Each aircraft goes through production, integration, calibration, and a full flight test program. We provide progress updates throughout.
A $500 deposit secures your build slot. The remaining balance is due before shipping. We accept Stripe (credit/debit cards), bank wire transfer, and cryptocurrency (BTC, ETH, USDC). The deposit is applied toward your total.
In the United States, drone operations are regulated by the FAA under Part 107. A Remote Pilot Certificate is required for commercial operations. Registration and operational authorization are typically required. We provide regulatory guidance for your jurisdiction as part of the Enterprise package.
100 km is achievable under optimal conditions: low wind, 4S4P battery (288 Wh), 200g or less payload, and cruise at 54–60 km/h. Conservative estimates show 104 km in moderate conditions, with best-case reaching 130 km. Every aircraft is flight-tested and we provide actual Wh/km logs from test flights.
The LW-PLA airframe is designed for repairability. Minor damage can be fixed with CA glue. For major structural damage, we offer replacement printed parts at cost plus shipping. The Enterprise package includes priority repair support for the first 12 months.
The DJI O3 Air Unit offers superior video quality (4K/60fps, 1/1.7" sensor, 155° FOV) and 10 km digital transmission. It's the best available camera system for a drone of this size. Walksnail Avatar HD is available as an FPV add-on for pilot-view flying in the Enterprise package.
Yes. The STEP files for the payload compartment (205 × 65 × 80mm) can be modified for custom cargo holders, sensor mounts, or release mechanisms. Enterprise customers receive CAD modification support.